Products
plant nutrient solution

Storage:Store at RT,3 years

plant nutrient solution
Cat.No:
LB0160
Brand:
Solarbio

Product introduction

For plant tissue culture.

Preparation method

Weigh the 2.14g in 1L distilled or deionized water, boil and dissolve, adjust the pH to 6.6-7.0, subpack, autoclave at 115℃ for 30 minutes, set aside.

Composition: g/L

Ammonium nitrate 1.12

Calcium chloride 0.33

Magnesium sulfate 493mg

Potassium iodide 0.83mg

Potassium dihydrogen phosphate 136mg

Boric acid 6.2mg

Ferrous sulfate 7.6mg

Manganese sulfate 22.3mg

EDTA Sodium salt 18.65mg

Zinc sulfate 8.6mg

Copper sulfate 0.025mg

Cobalt chloride 0.025mg

Sodium molybdate 0.25mg

Precautions

This product may contain a small amount of inorganic salt precipitate.


Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7