Products
Improved WPM medium

Storage:Store at RT,2 years

Improved WPM medium
Cat.No:
LB0180
Brand:
Solarbio

Product introduction

For the culture of woody plant tissues.

Preparation method

Weigh 0.565g of this product in 1L distilled water or deionized water, dissolve it with heat, add one modified WPM medium additive, mix, subpack, autoclave at 115℃ for 30 minutes, use sterile NaOH or dilute HCl solution adjusted to the required pH if necessary, and set aside.

Composition: g/L

5 water copper sulfate 0.25mg

Ferric Sodium EDTA:73.4mg

Boric acid:6.2mg

Manganese sulfate:22.3mg

2 Sodium molybdate:0.25mg

7 Water zinc sulfate:8.6mg

Potassium dihydrogen phosphate:170mg

Magnesium sulfate:180.54mg

Glycine:2mg

VB1:0.1 mg

Inositol:100mg

Nicotinic acid:0.5mg

VB6:0.5 mg

Precautions

This product may contain a small amount of inorganic salt precipitate.


Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7