Products
Mag-Fura-2 tetrapotassium salt

CAS:132319-57-4

Storage:Powder:-20℃,2 years;Insolvent(Mother Liquid):-20℃,6 months;-80℃,1 year

Purity:≥95%

Appearance:Solid

Mag-Fura-2 tetrapotassium salt
Cat.No:
IM5080
Brand:
Solarbio

Mag-Fura-2 tetrapotassium salt is an intracellular magnesium indicator. This special magnesium indicator is also used to detect high concentrations of calcium.

Usage method (for reference only) : Preparation of storage solution 1~5mM storage solution is prepared by adding high-quality anhydrous DMSO, such as 50μg Mag-Fluo-4 AM(Mw:817.65 g/mol) dissolved in 12μL DMSO, after fully dissolved, 5mM storage solution is obtained.

【 Note 】 Unused storage solution is recommended to be stored at -20℃ in separate packages to avoid repeated freezing and thawing, and should be stored away from light. Use it as soon as possible.

Operation procedure

【 Note 】 The following methods are for reference only and should be adjusted according to the specific cell type and experimental requirements. The loading temperature range is 25 to 37 ° C (higher temperatures will increase the loading speed, but lower temperatures will minimize the internalization of the dye).

【 Note 】 The addition of surfactant Pluronic F-127 can promote the uniform dispersion of AM probe in water-soluble buffer.

1 Preincubate cells at 25℃~37℃ for 10min.

2 Take 4μL Mag-Fluo-4 AM storage solution and 5μL 20% Pluronic F-127, add 1mL cell culture solution, and mix vigorously to obtain a uniform probe dispersion solution.

3 Take 250μL of the probe dispersion prepared above and add it into 750μL of cell-containing medium and mix it well to obtain the working solution with a final concentration of 1~5μM.

4 The probe was incubated for 15 to 60 minutes.

5 The cells were cleaned 3 times, and then incubated for 30min to ensure complete de-esterification of the probe inside the cells. After that, the appropriate instrument is selected for fluorescence determination.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7