Material: High-end glass slides

Size: 24 well cell culture plate

Color: After the slide is sterilized by gamma rays, the color of the transparent slide will slightly change to light brown, which is a normal phenomenon.

Thickness: 0.17mm

Diameter: 14mm

Whether sterile: gamma ray sterilization, no DNA enzyme, no RNA enzyme, no heat source, double-sided TC treatment, both sides can be used to avoid experimental error.

Description: TC slide surface treatment technology (TC treatment → super adsorption) to promote cell adhesion. Even in the late in situ hybridization, immunohistochemistry, immunofluorescence, laser confocal and other processing processes are not easy to remove the film, to avoid the damage from the traditional method of transfer from the culture bottle to the slide. The one-step method does not require pretreatment to avoid the situation that cells are easy to disassemble in the post-treatment.

Application: 1. Wipe the outer packaging aluminum foil bag with 75% ethanol in the super clean table.

2. Open the aluminum foil bag, take out the inner square bottle, and put the inner climbing plate into the culture plate or petri dish with sharp tweezers.

3. Before planting the cells, please first drop the culture solution or cell suspension onto the climbing plate, and then add the culture solution or cell suspension to avoid floating of the climbing plate.

Note: 1, the use of cell climbing tablets (such as in the six-hole plate into the climbing plate, the six-hole plate hole bottom area is often a part of the area of the climbing plate, adding cell suspension is often the cell spread throughout the bottom of the hole, sometimes the cell growth edge set phenomenon, that is, the density near the wall edge is higher, This way, the number of cells crawling on the central slide may be relatively small.) It is a good idea to put the slide into the hole of the hole plate, and add the cell suspension only onto the slide, until the liquid is all over the slide without spilling over the edge of the slide (because the liquid surface tension can easily do this!). . Put it in the incubator, wait for the cells to stick to the wall, remove it, then add the media to cover the whole bottom of the hole, and continue to culture, so that the density of cell growth on the slide will be concentrated;

2, the cell crawling tablet has three layers of packaging, open the packaging in the sterile state of the operation table, and the unused crawling tablet can be repackaged in the original packaging way.

3. The surface of the tablet has a positive charge, do not touch it with your hand, so as to avoid poor use effect;

4, climbing tablet high strength acid and alkali resistance, special experiment soaking for a week will not fragment.

Note：Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.