Products
WL Nutrient Agar

Storage:RT,keep dry

WL Nutrient Agar
Cat.No:
LA1880
Brand:
Solarbio

Product introduction

For counting yeast and bacteria in beer and fermentation products.

preparation method

Weigh 80g of this product in 1000ml distilled water (if WL identification medium is prepared, add 4mg of cycloheximide per liter of medium) and boil until completely dissolved. Autoclave sterilization at 121 ° C for 15 minutes. Shake after sterilization to prevent Agar from precipitate on the bottom of the dish and solidify.

composition: g/L

Yeast extract powder: 4.0

Glucose: 50.0

Potassium chloride: 0.425

Calcium chloride: 0.125

Magnesium sulfate: 0.125

Potassium dihydrogen phosphate: 0.55

Ferric chloride: 0.0025

Manganese sulfate: 0.0025

Bromocresol green: 0.022

Agar: 20.0

Acid hydrolyzed casein: 5.0

pH: 5.5±0.2, 25℃



Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7