Peptone-salt Solution
Storage:RT,keep dry
Product introduction
For dilution of the sample.
preparation method
Weigh 9.5g of this product in 1L distilled water or deionized water, boil until completely dissolved, divide into aliquots, autoclaving at 121℃ for 15 minutes, shake after sterilization, and set to use.
composition: g/L
Acid hydrolyzed casein peptone: 1.0
Sodium chloride: 8.5
pH: 7.0±0.1, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.