English
中文
Sodium malonate Medium
Storage:RT，keep dry
Product introduction
Malonate medium was used for bacterial biochemical identification.
preparation method
Weigh 9.0g of this product in 1L of distilled water or deionized water, boil until completely dissolved, divide into small test tubes, autoclaving at 121℃ for 15 minutes, and set to use.
composition: g/L
Yeast extract powder: 1.0
Ammonium sulfate: 2.0
Dipotassium hydrogen phosphate: 0.6
Potassium dihydrogen phosphate: 0.4
Sodium chloride: 2.0
Sodium malonate: 3.0
Bromothymol blue: 0.024
pH: 6.8±0.2, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark：
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note：
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
