Products
BTA Agar

Storage:RT,keep dry

BTA Agar
Cat.No:
LA1810
Brand:
Solarbio

Product introduction

For the test of Bacillus alicyclic acid.

preparation method

Weigh 28.95g of this product in 1L distilled water or deionized water (the amount of preparation can be increased or decreased according to the proportion), adjust the pH to 4.0±0.2 with 10N sulfuric acid solution at 25℃, heat and boil until completely dissolved, then pack, autoclave sterilization at 121℃ for 15 minutes, shake after sterilization to prevent the Agar from being deposited at the bottom of the vessel and coagulated.

composition: g/L

Yeast extract powder: 2.0

Glucose: 5.0

Calcium chloride: 0.25

Magnesium sulfate: 0.5

Ammonium sulfate: 0.2

Potassium dihydrogen phosphate: 3.0

Agar: 18.0


Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7