English
中文
WLN Medium
Storage:RT，keep dry
Product introduction
For the culture of bacteria, yeasts and molds during brewing and industrial fermentation.
Preparation method
Weigh 80g of this product, add it into 1000ml distilled water, dissolve it with heat, subpack it, autoclave at 121℃ for 15 minutes, and set aside.
Composition: g/L
Tryptone: 5.0
Yeast infusion powder: 4.0
Glucose: 50.0
Potassium dihydrogen phosphate: 0.55
Potassium chloride: 0.425
Calcium chloride: 0.125
Magnesium sulfate: 0.125
Manganese sulfate: 0.0025
Ferric chloride: 0.0025
Bromocresol green: 0.022
Agar: 20.0
pH5.5-5.8, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark：
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note：
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
