Dermatophyte Test Medium Base
Storage:RT
Product Introduction:
For the culture of skin fungi.
Preparation Method:
Weigh 37.5g of this product in 1L distilled water or deionized water (can be increased or decreased in proportion), heat and boil until completely dissolved, subpack, autoclast at 121℃ for 15 minutes, shake well after sterilization to prevent Agar from being deposited in the bottom of the vessel and coagulating, cool to about 50℃, add 50mg of actinone to every 100ml medium. Shake well, pour flat plate aside.
Composition: g/L
Soybean peptone: 10.0
Glucose: 10.0
Gentamicin sulfate: 0.1
Chloramphenicol: 0.1
Phenol red: 0.2
Agar: 17.0
pH: 5.5±0.2, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.