Products
PLET Agar Base

Storage:RT

PLET Agar Base
Cat.No:
LA7130
Brand:
Solarbio

Product Introduction:

Polymyxin B, lysozyme and imide acetate should be added for the isolation and identification of Bacillus anthracis.

Preparation Method:

Weigh 43.3g of this product in 1L distilled or deionized water, heat and boil until completely dissolved, subpack, autoclave at 121℃ for 15 minutes, shake well after sterilization to prevent Agar from settling in the bottom of the vessel and coagulating. Cool to 55℃, add the following sterile reagents (4mg thallium acetate, 30000U lysozyme and 3000U polymyxin B) per 100ml medium, mix well and set aside.

Composition: g/L

Bovine Heart Infusion Powder from 500g bovine heart: 13.0

Monthly peptone: 10.0

Sodium chloride: 5.0

EDTA: 0.3

Agar: 15.0

pH: 7.3±0.2, 25℃


Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7