English
中文
Amies Transport Medium
Storage:Store at
Product introduction
For the collection, transportation and preservation of pathogenic bacteria specimens.
Preparation method
Weigh 13.25g of this product in 1L distilled or deionized water, heat and boil until completely dissolved, subpack, autoclave at 121℃ for 15 minutes, cool slightly after sterilization, gently shake well, cool and solidified, set aside.
Composition: g/L
Sodium chloride: 3.0
Disodium hydrogen phosphate: 1.15
Potassium dihydrogen phosphate: 0.2
Potassium chloride: 0.2
Sodium thioglycolate 1.0
Calcium chloride: 0.1
Magnesium chloride: 0.1
Agar: 7.5
pH7.3±0.1, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark：
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note：
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
