MUG Medium
Storage:Store at
Product introduction
For Escherichia coli test.
Preparation method
Weigh 2.33g of this product in 100ml distilled water or deionized water, dissolve by boiling, divide into aliquots, autoclaving at 121 ° C for 15 minutes or 115 ° C for 30 minutes, cool and set to use. This product is slightly cloudy.
Composition: g/L
Peptone: 10.0
Potassium dihydrogen phosphate: 0.9
Disodium hydrogen phosphate: 6.2
Sodium deoxycholate: 1.0
Manganese sulfate: 0.0005
Zinc sulfate: 0.0005
Magnesium sulfate: 0.1
Sodium chloride: 5.0
Calcium chloride: 0.05
Sodium sulfite: 0.04
MUG: 0.0075
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.