Products
Needle-type solid phase extraction SPE empty column 3ml

Storage:RT

Needle-type solid phase extraction SPE empty column 3ml
Cat.No:
YA3311
Brand:
Solarbio

Nominal volume: 3mL

Length of column tube: 74.40mm

Pipe length: 64.60mm

Inner diameter: 8.85mm

It is made of medical grade polypropylene (PP) injection molding, with 2 pieces of hydrophobic sieve plate, the interface is Ruhr male, and the optional column push rod is used for the filtration of complex samples. Composed of empty column tubes and upper and lower sieve plates, it can be self-filled with SPE adsorbents, filter membranes, solid reactants, etc., to meet the flexible needs of the laboratory.

Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.

Remark:
These protocols are for reference only. Solarbio does not independently validate these methods.

Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Service  for  Scientific  Research,  Responsible  for  the  Life  Science
Contact Us
Address: No 85, Liandong U Valley, Middle Zone, 101102, Tongzhou Dist, Beijing, China
Tel: +86 010 50973105
Technical Support Email: service@solarbio.com
Purchaser Email: purchase@solarbio.com
Sales Email: sales@solarbio.com
Copyright © 2005-2021 Solarbio all rights reserved.
 ICP Filing Certificate京ICP备12051307号-7