English
中文
0.1% peptone water
Storage:Store at 2-25℃，avoid light
Product introduction
For sample dilution.
Peptone provides nitrogen source.
How to use
1. Remove from storage (2-25 ° C) and return to room temperature.
2. Disinfect the surface of the bottle cap with 75% alcohol, and use after opening the bottle cap.
3. Add samples according to the prescribed method. After the sample is added, it is cultured in the incubator at the specified temperature and time.
4. After the end of the culture, take out the observation results from the incubator.
Composition: g/L
Peptone: 1.0
Distilled water: 1000mL
pH 7.1±0.2
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark：
These protocols are for reference only. Solarbio does not independently validate these
methods.
Note：
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
